When setting the width for the conveyor on our Raptor machine, it appears that the motor responsible for setting the width moves in the wrong direction. As a result, the width entered into the software is wrong and moves the conveyor in the wrong direction. This also means the min limit of 50mm is not enforced correctly and the conveyor can easily crash into itself if we're not careful.

We've calculated that the real width = 250.75mm - software width

Is there a software setting we can change to fix this? Or a simple hardware change?

See provided video for example. Originally set conveyor to 148mm, actual width is 102mm. Change width to 128mm, actual width is 122mm: https://photos.app.goo.gl/kgnWpbqZiwCJGuC29

Software version: 2.066 and 2.067